Some pool advise again plsNorth Cyprus Forums Homepage Join Cyprus44 Board | Already a member? Login
Popular Posts - List of popular topics discussed on our board.
You must be a member and logged in, to post replies and new topics.
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 17:42 | Join or Login to Reply | Message 1 of 15 in Discussion |
| Why would I have started getting bubbles coming up from the floor jets when the balance tank is full? |
cyprusman3


Joined: 09/06/2009 Posts: 297
Message Posted: 05/08/2010 18:02 | Join or Login to Reply | Message 2 of 15 in Discussion |
| maybe your balance tank valve is close !!! |
zerochlor

Joined: 03/04/2009 Posts: 4024
Message Posted: 05/08/2010 18:07 | Join or Login to Reply | Message 3 of 15 in Discussion |
| tootie. it could be possible your pump is letting in air somewhere or 1 of the pipes in your pump room is letting in air. sounds like its deffo sucking in air from some where. |
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 18:11 | Join or Login to Reply | Message 4 of 15 in Discussion |
| I thought that but its still overflowing and seems to be working as normal, except for the bubbles. The only thing I can think is its started doing it since the last back wash yesterday morning. Could it just be an air lock releasing slowly? Pump room is also dry? |
guidosp1

Joined: 30/12/2008 Posts: 341
Message Posted: 05/08/2010 18:12 | Join or Login to Reply | Message 5 of 15 in Discussion |
| m8 your return valve is stuck may be a little rubbish or something is blocking the water from the pool to the balance tank. you need to close all the valves and unscrew the pipe just above the entry to the balance tank. once removed just clean the inside. is like a cone with a spring, so push the cone down and you will clear the pipe section. re-install and open your valves. guido |
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 18:13 | Join or Login to Reply | Message 6 of 15 in Discussion |
| Zero, But would it not leak even a bit when the pump is off? As I say pump room is bone dry. |
zerochlor

Joined: 03/04/2009 Posts: 4024
Message Posted: 05/08/2010 18:18 | Join or Login to Reply | Message 7 of 15 in Discussion |
| tootie. try the return valve if pump room is bone dry. if you dont want to be down there checking it yourself,give us a call tomorrow,we will come over and sort it . |
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 18:29 | Join or Login to Reply | Message 8 of 15 in Discussion |
| Guido, Carrot cake, steak and now pools. Does it every end? Dont answer that Zero, if its still playing Jacuzzi's tomorrow I will call you, I dont think I can even fit down the pump room! Only cos it was built by slim ass Turk. Thanks guys |
zerochlor

Joined: 03/04/2009 Posts: 4024
Message Posted: 05/08/2010 18:31 | Join or Login to Reply | Message 9 of 15 in Discussion |
| you better stop eating guidos carrot cake and steak then |
snakes


Joined: 28/10/2008 Posts: 1512
Message Posted: 05/08/2010 18:49 | Join or Login to Reply | Message 10 of 15 in Discussion |
| Think you need a massive dose of "snake rock" sunday toots !!! regards Barry ps Cratos have been warned ha ha ! |
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 18:49 | Join or Login to Reply | Message 11 of 15 in Discussion |
| LOL Zero. But its fit down my pump room or give up the best steak in NC.. |
Tootie

Joined: 28/08/2008 Posts: 2037
Message Posted: 05/08/2010 18:52 | Join or Login to Reply | Message 12 of 15 in Discussion |
| Dont worry Barry I'll be there. Hopefully with Guido and Liz. Ps I now have a Cratos VIP Membership, It came in the post this week |
keithcaley


Joined: 13/06/2008 Posts: 2521
Message Posted: 05/08/2010 21:45 | Join or Login to Reply | Message 13 of 15 in Discussion |
| BLEEDER! - I mean the 'bleed valve' on top of the big filter tank - while the pump is running, just unscrew it half a turn or so, until you can hear air rushing out of it - eventually, the air will stop, and a small jet of water will start to come out. At this point, you can screw the bleed valve back down - make sure that the water has stopped! Check that no bubbles are coming out of the jets. If you get water straight away when you open the bleed valve, then that's not the problem. It's a bit like bleeding a radiator... |
Groucho


Joined: 26/04/2008 Posts: 7993
Message Posted: 05/08/2010 22:42 | Join or Login to Reply | Message 14 of 15 in Discussion |
| We've always had staff to do that Keith... |
keithcaley


Joined: 13/06/2008 Posts: 2521
Message Posted: 06/08/2010 08:41 | Join or Login to Reply | Message 15 of 15 in Discussion |
| ...But you just can't get the bleeding staff these days... - thanks for feeding me that line |
North Cyprus Forums Homepage
Join Cyprus44 Forums | Already a member? Login
You must be a member and logged in, to post replies and new topics.
|