Help with 'Toro-212' Irrigation timer

wba1109


Joined: 25/09/2010
Posts: 3

Message Posted:
25/09/2010 10:39

We have Torro irrigation timer that is playing up.....it runs ok in zone A for 7 mins we then told it to wait 1 min and go to zone B for 6 mins, which it does....but then repeats itself. If there is anyone out there who can tell us what we're doing wrong we'll buy you a drink. We are in Karsiyaka (North Cyprus). Going home next wednesday so would appreciate any help before we leave. Thanks ever so much.

fiendishpaul


Joined: 18/05/2008
Posts: 1720

Message Posted:
25/09/2010 12:14

Hi



Sorry i don't have the answer to your problem but attached is a link to the operating instructions for the Toro 212 - just in case you have lost the original manual.



Good luck



http://www.toro.com/irrigation/res/downloads/res_controllers/tmc-212_series/international_user_guides/TMC-212_user_eng.pdf



Paul

wba1109


Joined: 25/09/2010
Posts: 3

Message Posted:
25/09/2010 14:03

Thanks we've got that and gone thru the troubleshooting bit, but even though the readings are correct....as far as we can see, it still repeats the process. Thanks for trying to help though.

toroguy


Joined: 26/09/2010
Posts: 1

Message Posted:
26/09/2010 18:51

Check the season adjust and make sure it is not above 100%. If it is above 100% it will break the scheduled run time into 2 cycles to avoid excess runoff while ensuring that water percolates to the root zone.