Flat tyre - help neededNorth Cyprus Forums Homepage Join Cyprus44 Board | Already a member? Login
Popular Posts - List of popular topics discussed on our board.
You must be a member and logged in, to post replies and new topics.
muffin

Joined: 03/07/2010 Posts: 83
Message Posted: 01/01/2011 15:13 | Join or Login to Reply | Message 1 of 14 in Discussion |
| We have a flat tyre and unable to remove the wheel. Anyone know of a tyre garage open over the weekend who could fix this for us? |
pupaden

Joined: 04/05/2008 Posts: 75
Message Posted: 01/01/2011 15:23 | Join or Login to Reply | Message 2 of 14 in Discussion |
| do you have a spare to put on |
greenman

Joined: 16/02/2008 Posts: 526
Message Posted: 01/01/2011 15:54 | Join or Login to Reply | Message 3 of 14 in Discussion |
| If it's an alloy wheel they can get stuck. If you have tried kicking the wheel and no joy, try loosening the wheel nuts and push (or gently drive) the car forwards and backwards a metre. This will help to break the bond. Before replacing try getting hold of some copper grease and coat the contact area. |
cyprusjoker

Joined: 29/08/2009 Posts: 1107
Message Posted: 01/01/2011 16:18 | Join or Login to Reply | Message 4 of 14 in Discussion |
| I think the problem is that his nuts are to tight |
lovingcyprus

Joined: 02/03/2007 Posts: 1272
Message Posted: 01/01/2011 16:39 | Join or Login to Reply | Message 5 of 14 in Discussion |
| Greenman is correct, if you can get the nuts off then just hammer the tyre really hard and in several places, you won't damage it. I had this problem on my car and just watched the garage do just as I have outlinned |
deputydawg

Joined: 30/03/2010 Posts: 1727
Message Posted: 01/01/2011 17:04 | Join or Login to Reply | Message 6 of 14 in Discussion |
| Might not help this time but I always carry with the spare wheel a 3 ft plus length of square, hollow, piping, bound at one end with duct tape for grip. This fits over the handle of the spider spanner used to remove the wheel nuts. From an upright position, utilising the increased strength of the piping, the torque you can apply to the nuts is increased many fold and in my experience will undo the over tightened nuts at the first heave. This should be done before jacking up the vehicle as the power generated is astonishing and can pull the vehicle off the jack. This self made implement is also a very good deterrent to back seat drivers ! |
pupaden

Joined: 04/05/2008 Posts: 75
Message Posted: 01/01/2011 17:22 | Join or Login to Reply | Message 7 of 14 in Discussion |
| if its an alloy wheel use a wooden or rubber mallet not a hammer or you can damage the wheel |
Ossie

Joined: 19/01/2008 Posts: 311
Message Posted: 01/01/2011 18:52 | Join or Login to Reply | Message 8 of 14 in Discussion |
| Nobody has answered Muffin's question,is there a garage near where she lives ie Bellapais that can help her? 'fraid the nearest one that I know of is at Bahceli. |
dusty48

Joined: 14/08/2008 Posts: 258
Message Posted: 01/01/2011 20:43 | Join or Login to Reply | Message 9 of 14 in Discussion |
| ring allan 0533 846 3189 he is at Bellapais and he will sort it out |
throstle

Joined: 26/05/2008 Posts: 85
Message Posted: 01/01/2011 21:13 | Join or Login to Reply | Message 10 of 14 in Discussion |
| Can only half help Tyre and exhaust replacement garage next door to KAR (dont know tel number) Called them out when we in Gatalkoy they came out changed flat and arranged to fit new as necessary Remember tyre may have to be change depending on where puncture is |
alibali41

Joined: 02/01/2011 Posts: 5
Message Posted: 02/01/2011 09:08 | Join or Login to Reply | Message 11 of 14 in Discussion |
| Hello muffin You got your tyre sorted yet |
Tenakoutou


Joined: 27/07/2009 Posts: 4110
Message Posted: 02/01/2011 10:34 | Join or Login to Reply | Message 12 of 14 in Discussion |
| What you need is a 'spanner-faced' woman - they can generally make your nuts tighten, or untighten! |
cyprusharv

Joined: 16/12/2008 Posts: 423
Message Posted: 02/01/2011 10:42 | Join or Login to Reply | Message 13 of 14 in Discussion |
| Call Alan (scottish) on 0533 846 3189 |
muffin

Joined: 03/07/2010 Posts: 83
Message Posted: 02/01/2011 12:21 | Join or Login to Reply | Message 14 of 14 in Discussion |
| Many thanks to all for advice. Rocked car, Bashed wheel with 4lb hammer and eventually it came off, Emergency spare now on and ready for trip to garage on Monday. Happy New Year to you all. |
North Cyprus Forums Homepage
Join Cyprus44 Forums | Already a member? Login
You must be a member and logged in, to post replies and new topics.
|