What could be wrong with my air con unit

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
10/01/2011 02:01

Not working, checked remote, remote ok. wall switch appears ok, very little usage as it is in spare room. Help ?

BoTanica


Joined: 22/12/2009
Posts: 714

Message Posted:
10/01/2011 08:39

Haven't accidently set the timer have you?

martinD41


Joined: 06/09/2010
Posts: 3001

Message Posted:
10/01/2011 09:21

Check the fuse!!

martinD41


Joined: 06/09/2010
Posts: 3001

Message Posted:
10/01/2011 09:23

or try the reset button,if your unit has one

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
10/01/2011 10:17

I have tried all of the above. the same remote works other AC units on the ajoining rooms !!

HildySmith


Joined: 02/07/2009
Posts: 1708

Message Posted:
10/01/2011 10:21

We had the same problem had to call a guy in and it needed to be

- regassed

- serviced

- one needed a part put in it

all working fine now.

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
10/01/2011 10:45

What brand is your a/c? It may be the indoor unit PCB which fails in certain brands.

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
10/01/2011 11:26

Thanks HildySmith maybe it does need to be regassed



TRNCVaughan. the make fails me at present I think it is Turkish begins with an A !!!

YFred


Joined: 06/05/2009
Posts: 1471

Message Posted:
10/01/2011 11:30

May be it has run out of air, on account that Eroglu and Christofias has used it all up in the negotiations?

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
10/01/2011 12:18

pipie,



If you can't get to the bottom of it, give me a call and we will pop round to take a look.

0533 845 8494

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
10/01/2011 12:40

Cheers Vaughan will do !!

Pippie


Joined: 02/12/2009
Posts: 1288

Message Posted:
10/01/2011 15:51

It's too cold for Air Con at the moment!!!

hodgeliz


Joined: 16/10/2010
Posts: 278

Message Posted:
10/01/2011 17:12

Not if its full of hot air

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
10/01/2011 17:53

Nah !! that fits you department hodgelz as demonstrated. LOL

laptarunner



Joined: 02/11/2009
Posts: 217

Message Posted:
10/01/2011 23:54

If its low on gas, that will not stop it working. I suspect the problem could be the fuse in the spur box, or the circuit breaker in your main board. The c/breakers sometimes get weak and trip, also if its an older style unit ( not fitted with an inverter) it should have a circuit breaker, I think with a prefix M to allow the start load of the compressor motor starting.



But Vaughans your man.

Pipie


Joined: 05/01/2008
Posts: 5499

Message Posted:
11/01/2011 00:11

Cheers laptarunner !!