PVC patio door sliding control repair neededNorth Cyprus Forums Homepage Join Cyprus44 Board | Already a member? Login
Popular Posts - List of popular topics discussed on our board.
You must be a member and logged in, to post replies and new topics.
chezzi
Joined: 12/03/2009 Posts: 162
Message Posted: 20/03/2011 21:33 | Join or Login to Reply | Message 1 of 7 in Discussion |
| Can anyone please suggest a quick and reasonable repair person, West Side Girne? Thanks |
No1Doyen
Joined: 04/07/2008 Posts: 16617
Message Posted: 20/03/2011 21:36 | Join or Login to Reply | Message 2 of 7 in Discussion |
| Might be too far for you but there is a guy in Tin Pan alley. |
rowlo
Joined: 12/10/2008 Posts: 4796
Message Posted: 20/03/2011 21:39 | Join or Login to Reply | Message 3 of 7 in Discussion |
| whats wrong with it ? its on a track no control reqd ? |
wanderer
Joined: 05/02/2009 Posts: 1653
Message Posted: 21/03/2011 07:30 | Join or Login to Reply | Message 5 of 7 in Discussion |
| Used Proline excellent service replaces a misted unit didn't want to charge thought they had supplied it and were going to do it under warranty I put them right it wast one of their that had failed but it shows they guarantee the work |
Tenakoutou
Joined: 27/07/2009 Posts: 4110
Message Posted: 21/03/2011 11:11 | Join or Login to Reply | Message 6 of 7 in Discussion |
| We used the guys from the window manufacturer next to Lemar [Karaolanoglu] - don't know if they are still there [next to the American car wash]. Our problem was that the window company that installed our double-glazed windows didn't put enough wheel-tracks to support the patio doors. The tracks wore and collapsed after very little use, making the patio doors nearly impossible to slide and wearing out the aluminium track they slide on. Another usual TRNC 'dump it and run' jobbie! The 'fix' was to put several wheel-tracks under the sliding doors, to spread the load. We had this done and subsequently haven't had further problems. That's not to say we don't expect to get them - we do! This is because the tracking should be made of stainless steel - not soft aluminium, and the wheel-tracks are rubbish, compared to what we had on our sliding doors in the South. |
Egepen
Joined: 24/02/2011 Posts: 57
Message Posted: 21/03/2011 12:07 | Join or Login to Reply | Message 7 of 7 in Discussion |
| Hi Chezzi, We are a PVC company based in Kyrenia, we can easily come up and check any problems you might have with your PVC. You can contact us on 0542 852 5258 or info@egepenkyrenia.com Thanks |
North Cyprus Forums Homepage
Join Cyprus44 Forums | Already a member? Login
You must be a member and logged in, to post replies and new topics.
|