leaves in swimming pools heat saver north cyprus

JohnWG


Joined: 15/03/2010
Posts: 27

Message Posted:
07/04/2011 20:37

Are you fed up with leaves blocking the non return valve allowing water to drain into balance tank whixh then overflows loosing water.

I had toclean mine each week but then a Butterfly check valve was installed. Not touched the valve now for 18 months through every season.

Now available in North Cyprus from Heatsaver North Cyprus

John 0532 340 2230

or

Kemal 0533 850 7517

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
08/04/2011 07:19

Hi John,



This sounds interesting and as we have over 150 pools under maintenance, blocked n/r v/v's are a pain and a cause flooding and water loss.



Please can you contact me on



vaughan@sunnycyprus.net

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
08/04/2011 10:02

John,



my telephone number is 0533 845 8494

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
10/04/2011 18:47

I now have one of these v/v's for appraisal.



I must say my first impression is that this v/v is a vast improvement in design on the usual bullet-nosed type n/r v/v.



We have 4 pools currently under construction and it is my intention to fit this v/v as standard from now on.



For pool owners suffering from the problem of regularly choked n/r v/v's, this is the solution.



Please contact me for a free, no obligation quote to supply and fit one of these valves.



vaughan@sunnycyprus.net

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
11/04/2011 11:35

bttt..................

Groucho



Joined: 26/04/2008
Posts: 7993

Message Posted:
11/04/2011 11:47

Vaughan,



Will they not simply replace the existing n/r valve? Or do they require changes to the pipework?

TRNCVaughan


Joined: 27/04/2008
Posts: 4578

Message Posted:
11/04/2011 12:06

The "original" valve is probably glued in and will require cutting out. This will leave the pipework a little short and it may need extending to accomodate the new valve. Therefore, there will likely be a bit of cutting and glueing needed. As the glue needs 24 hours to go-off before water can be re-introduced, there may also be a little travel charged.

Hence the free, no-obligation survey and quote.