For Sale：Maintenance of vertical shaft impact crusher

nathli


Joined: 12/12/2011
Posts: 26

Message Posted:
10/01/2012 10:22

As to the Maintenance , the following points should be pay attention to:

Ⅰ Check up the wear and tear condition of inner machine timely; repair or replace the end wearing module, impact block, separating cone, upper and lower wear plates. Ⅱ The bearing is suitable for 3# lithium lubricating grease. The grease is 10-20 gram every time, once one day. The bearing must be clean up after the machine worked for 2,000 hours.

About safety:

Ⅰ Don’t open the inspection door to look into going when the machine is operating.

Ⅱ The workers should be apart from the machine when the machine is operating. If the repair is necessary, the workers must stop the machine.

Ⅲ If the machine doesn`t start or flameout,please cut off the power source. Contact your engineers or us.

Homepage:www.zdcrusher.com

E-mail:zd-machine@kssb.cn